Tips to Pressure Wash Your Deck Safely

Pressure Wash is an easy way to remove accumulated dirt and grime. Here are some tips to get the job done safely. You’ll want to prepare the surface for the pressure washing process and make sure to follow safety precautions. In addition, you’ll want to learn about the chemical products to use.

Pressure Wash

Before pressure washing your deck, you must prepare the area properly. First, you must sweep off any heavy dirt or discoloration. This will make the pressure washing process easier. Next, you should use a scrub brush or a nylon brush to scrub away the dirt and grime. You can also wear rubber gloves for extra protection. After that, you can fill a bucket with water containing a few drops of detergent. Dip a long-handled scrub brush in the soapy water and use it to scrub away the dirt.

Next, you need to make sure the deck surface is dry. It may take two days or more to dry fully. If it’s raining, it may take even longer. Once the surface is dry, you can perform additional projects on it. This will help you reduce future maintenance costs. Moreover, you can seal the deck with a sealer or stain.

Finally, you need to use the right power washer. You must also prepare the area around the deck by pre-treating it with soap and water solution. To ensure that the deck surface doesn’t get damaged, you must keep the spray nozzle at a distance of 12 to 18 inches from the surface. It is also important to maintain a constant distance from the deck surface and spray water in even strokes in the direction of the wood grain. Never pressure-wash your deck in a zigzag pattern, or you’ll end up with patchy patches. Make sure to dry the area completely afterward.

After finishing the prep work, you can proceed with the actual pressure washing. You must keep in mind that pressure washers can have dangerous kickback force, so make sure to operate them carefully. Be sure to wear rubber gloves and rubber boots to protect your hands and feet. Also, wear safety goggles to protect your eyes and face from chemical splashes. You should also wear a disposable respirator to avoid hazardous fumes. Finally, keep the exhaust from the pressure washer at least 3 feet away from objects.

Pressure washing your deck can be a very expensive job. The cost varies depending on the size of your deck and the material. The more material and labor involved, the more expensive it will be. Most homeowners will spend between $119 and $244 for the task. However, some companies charge more than this.

The cost of pressure washing a deck depends on many factors, including the size of your deck, the complexity of the design, and local labor costs. For example, a small deck can cost as low as $100 to $300, while a large deck can cost up to $500. The price will also depend on the time of year you get your deck cleaned. The high demand for pressure washing a deck during the spring can push up labor costs.

If you want to save money, you may want to consider hiring a professional. Although it might seem like a simple task, pressure washing a deck requires proper knowledge and equipment. If you’re not trained in this field, you could end up causing irreparable damage. Hiring a professional deck cleaner can avoid costly mistakes. Prices for this service depend on the size of your deck and the current market rate.

The price of pressure washing a deck varies depending on the materials used in the deck. Some types of wood are more delicate than others and require more work and finesse. They also require more time to clean. Some materials can withstand greater pressure than others, but this can make the process more expensive.

Many companies charge more during peak seasons, and you should compare prices to get the best value. In general, pressure washing a deck should be done at least two to three times per year. The price will also vary depending on the weather in your area.